It can be difficult to buy a best sla printer under 300 online without feeling anxious. There are a lot of things to consider before finalizing your purchase. For example, you might worry about how the product will arrive or if it’s good enough for your needs. It’s also hard to know if the company is reliable. To help you feel more confident in your purchases, we’ve made a list of top 10 best sla printer under 300 for our readers.
Review of Best Sla Printer Under 300
Top Pick
1. ANYCUBIC Photon Mono 4K 3D Printer, 6.23” Monochrome Screen Upgraded …
- Brand: ANYCUBIC
- Manufacturer: ANYCUBIC
- Color: Yellow
- Dimensions: Height: 15.07 Inches Width: 8.94 Inches Length: 8.74 Inches Weight: 9.36 Pounds `
Features
- [High-speed 3D Resin Printer]: ANYCUBIC Photon MONO 4K 3D printer is upgraded with 4k monochrome LCD with 35um XY pixels, is one of the greatest accuracies in 3D printing field. The 7% high light transmittance could absorb higher curing UV power for faster printing and curing speed, the single-layer exposure and curing time is as low as 1.5s. The printing speed can reach up to maximum 50mm/h. 2.5X faster than original 2k printer.
- [4K High Resolution & Higher Accuracy]: This newly high resolution 3840×2400 MONO 4K resin printer has smaller pixel and sawtooth texture, to print more delicate and smooth surface; and MONO 4K uses a high contrast ratio more than 350:1 monochrome screen, which makes the image in the exposure areas more accurate and produce highly-detailed prints with clearer and sharper edges and corners, thus improving the quality and success rate of printing, also greatly reducing the residue in resin vat.
- [6.23″ Large Screen & Larger Print Size]: The Photon Mono 4K is equipped with a decent 6.23″ screen, which is 29% larger than the Anycubic Photon’s 5.5” in screen area. It can also print up to 6.5×5.2×3.1in at a time, which offers your creations more possibilities.
- [Adjustable Power & Universal Compatibility]: With 30%-100% light power regulation, Anycubic Photon Mono 4K supports not only ordinary 405nm UV resins, but also special resins, making it compatible to more materials and environments. In addition, adjusting the light power appropriately can extend the lifespan of both the screen and light significantly.
- [Improved LCD Protection]: Compared to all other mono series LCD printers in the market, for many LCD screen problems, Our MONO 4K screen printer has added a replaceable anti-scratch film between the protective film and the screen itself to improve the protection for screen, and comes with one-piece extra protective film for replacement.
Best Quality
2. ANYCUBIC 3D Printer Resin, 405nm SLA UV-Curing Resin with High …
- Brand: ANYCUBIC
- Manufacturer: ANYCUBIC
- Color: Grey
- Dimensions: Height: 4.724409444 Inches Width: 4.724409444 Inches Length: 11.023622036 Inches Weight: 2.20462262 Pounds `
Features
- Low Shrinkage & High Precision: ANYCUBIC UV resin prints the models with low shrinkage during the photocuring process, which ensures the high precision and smooth surface.
- Quick Curing & Strong Stability: ANYCUBIC photopolymer resin was specially developed to reduce the forming time with its extraordinary fluidity, and 3d model shows good stability in moist and corrosive environment after cured.
- Rigidity & Toughness: ANYCUBIC LCD resin has a good combination of hardness and toughness, which brings easy removal of the model and delivers accurate printing details.
- Multiple Colors & Universal Compatibility: ANYCUBIC standard resins are compatible with the majority of DLP/SLA/LCD 3D printers, works best with ANYCUBIC LCD 3D printers, multiple colors for your choice.
- Safe & Secure Package: ANYCUBIC UV-Curing resin bottle is packed well in plastics bubble wrap, the cap is completely intact, surrounded by a tight-fitting air bag. No worries for leakage.
Recommended
3. ANYCUBIC Wash and Cure Station, Newest Upgraded 2 in 1 …
- Brand: ANYCUBIC
- Manufacturer: ANYCUBIC
- Dimensions: Height: 14.88186 Inches Width: 8.6614 Inches Length: 8.85825 Inches
Features
- Newest Upgraded and More Convenient: Newest Wash and Cure machine added lens to UV lamp beads, the light source intensity distribution is more uniform, and the surface of the model is smoother. With the 360° automatic rotating curing table and added bottom reflector, the bottom curing has no dead ends, so that the entire model is cured more thoroughly
- 2-In-1 Wash and Cure Station: Dual functions of cleaning and curing can not only remove most of the chemicals, settle scrubbing and mess issues, but also seriously streamline the whole post-processing. It’s a professional solution to the messy clean up job of your fabulous prints and also helps reduce the clutter on your desk. 1-60min time adjustable, customize knob cleaning and curing time. Each layer of the 3D printer model can be better cleaned and cured according to your DIY needs
- Widely Compatibility: The ANYCUBIC wash and cure machine is a great addition to most type of regular resin printer, Compatible with most LCD/DLP/SLA 3D printers such as QIDI Shadow, NOVA, Mars series and other regular resin printers with similar build volume size as it does for photon series, this Wash & Cure machine has opened up a whole new world of 3d printing for you and greatly enhance your workflow
- Effective and Diverse Washing Modes: There is a propeller in the bottom of wash cure station, when work, it spins the solution like a little tornado and changes spin direction halfway through the wash , which creates the perfect flow to clean every inch of the print. 2 modes of Cleaning: 1. Basket washing, Remove the model and put it into the basket for direct cleaning; 2. Suspension washing, Directly hang the print platform on the basket or cleaning stand to clean, reducing exposure to resin
- Anti-UV Light Hood: The transparent cover of this wash cure machine can block up to 99.95% of ultraviolet rays with a wavelength of 405nm, thus able to be effective in high resin solidification rate; and this wash and curing box adopts sealed cleaning, which effectively prevents the cleaning agent from splashing and volatilization, and provides more safety.
4. ELEGOO Mercury Plus 2 in 1 3D Printing Washing and …
- Brand: ELEGOO
- Manufacturer: ELEGOO
- Dimensions: Height: 13.85 Inches Width: 7.87 Inches Length: 7.87 Inches
Features
- 【Upgrade Protection Function】Sealed washing to prevent the volatilization of alcohol during the cleaning process . Fan-less curing mode makes it quieter to use. The anti-UV lid can block 99.95% of ultraviolet rays to protect your eyes.
- 【Intelligent Curing and Washing】The front TFT screen can directly display the setting time and remaining time, and the operation is simple and intuitive. With built-in 16 pcs of 405nm UV LED and a 360-degree rotating turntable, you can uniformly cure the model.
- 【Flexible Washing Mode】The models can be placed in a cleaning basket to be cleaned separately, or mount the build plate with models on it and wash them together, which can avoid direct contact with the uncured resin. The height of the platform bracket can be adjusted to fit the liquid level in the bucket.
- 【Ideal Compatibility】Compatible with most of the LCD/DLP/SLA 3D printers like ELEGOO Mars, Mars Pro, Mars C, Photon, Photon s etc, which provides you an ideal support for washing and curing your 3D resin prints.
- 【Special Notes】The washing function is not quite suitable for 3D models printed with water washable resin, which is better to be washed with running water.
5. ANYCUBIC Wash and Cure Machine 2.0, 2 in 1 UV …
- Brand: ANYCUBIC
- Manufacturer: ANYCUBIC
- Dimensions: Height: 19.68503935 Inches Width: 19.68503935 Inches Length: 11.81102361 Inches
Features
- 2-in-1 Multifunctional Design: The machine has dual functions of cleaning and curing. It makes it easier to clean and cure the printed model. It is an excellent assistant for UV LCD 3D printers. A dual-purpose machine to save more space and keep the working area clean.
- Cleaning Mode: 1. Basket cleaning: remove the model and put it into the basket for direct cleaning; 2. Hanging cleaning: directly hang the print platform on the cleaning basket or cleaning stand to clean, reducing exposure to resin. Compatible with most LCD/DLP/SLA 3D printers such as Mars series, Photon series, etc. on the market.
- Anti-UV Light Hood: One-piece molding hood, 99.95% blocking rate of 405nm wavelength UV light. The resin cleaning and curing station adopts sealed cleaning, which effectively prevents the cleaning agent from splashing and volatilization, and provides more security.
- UV Lamp Beads Upgrade Curing Mode: lamp beads add lenses, the light source intensity distribution is more uniform, and the surface of the model is smoother. With the 360° automatic rotating curing table, the bottom reflector is added, the bottom curing has no dead corners, so that the entire model is cured more thoroughly.
- Custom Time Adjustment: 1-60min time adjustable, knob custom cleaning and curing time. Each layer of the 3D printer model can be better cleaned and cured according to your DIY needs. After cleaning and curing the model, the performance is significantly improved, helping you create a perfect model.
6. Sovol 3D Upgraded Platform 2 Pack, Resin Magnetic Flexible Steel …
- Brand: Sovol 3D
- Manufacturer: Sovol
Features
- Spring steel plate with high chromium content, easy to bend and clean. Much easier to remove prints and avoid damages during the process, especially for small prints. Good corrossion resistance and prevent rust. Brushed surface provides better adhesion, ensure a perfect print.
- ‼Please adjust the z limit switch after installation. It should be 2.7mm higher. That means the printing height will be reduced about 2.7mm. You can print a spacer to compensate the difference. If you do not receive instrucstions coming with the product, please refer to the last 2 pictures we listed on the product webpage which contains instructions in details. Any other questions or issues about the product please feel free to contact us.
- The magnetic base offers powerful magnetics, ensure perfect fit with steel plate. The two easy lift tabs(handles) make it easier to remove the steel plate from the magnetic base.
- !!! Please clean up your build plate with alcohol to make sure there is no any resin or dust left on the surface. The build plate must be clean and dry. And you need to stick and compact the magnetic base on build plate to make sure no any bubbles. Otherwise the magnetic base would peel off. Please wait for 72 hours after installation and before printing. Tips: You can use hair dryer blow the magnetic base evenly with hot wind for 5-10 mins after installation to increase the adhesion.
- The spare steel plate can achieve continuous printing, restart printing before you start cleaning the first, save your time.
7. Creality 3D UW-01 Washing and Curing Machine 2 in 1 …
- Brand: Creality
- Manufacturer: Creality
- Dimensions: Height: 14.5669 Inches Width: 8.85825 Inches Length: 8.85825 Inches Weight: 14.33004703 Pounds `
Features
- [Wash and Cure] UW-01 all-in-one washing and curing machine adopts a special control system, which support one step to finish the model postprocess. The curing size can reach φ165x200mm, and the mirror surface treatment of the turntable makes the model better.
- [Double-Row UV Lamp Beads& 360°rotating platform] With built-in LED beads(18 pieces of UV LED lights), the machine is compatible with most of resin printers; The double row 9-bead design with a higher irradiated area realizes quick curing and even irradiation for the larger model. 360c curing tray with magnetic force and reflective mirror make full use of the light source, which cures the model all the angle.
- [Large-Size Washing Container] 190x154x200mm washing container size. It support larger size models for cleaning; with a sealed container and lid, it avoids cleaning solution volatilization and also stores the cleaning solution for the repeated use.
- [Adjustable Speed&2-90min Optional]:With three-gear speed mode, it includes washing and curing; The washing and curing time has 2-90min optional. Delicate models come from the curing and washing.
- [LED HD Touch Button] Equipped with touch-sensitive buttons and LED large-size screen, the machine gives you a premium experience.Once the machine cover is removed during the curing process, it will immediately suspend the curing, which avoids light source glare and reduces light pollution.
- [Multiple functions] A feature that supports washing and curing models.
- [Self-adjustable bracket] Suitable for most resin printing platforms. Flexible in the z-axis, fit the model with the water level.
- [Adjustable three-gear speed and 2-90 min optional] With three-gear speed mode, it includes washing and curing; The washing and curing time has 2-90 min optional. Delicate models come from curing and washing.
- [Dual-band UV light source] Realize quick curing even for the larger model. Reflective mirror added to cure the model at all angles.
- [Flexible wash method] model can be washed separately in a washing basket or together with the bottom plate.
8. Solar Turntable 360° Rotating Stand, Double Used Rotating Display for …
- Brand: Creality
- Manufacturer: Creality
- Color: Silver
Features
- Maximum display /rotate weighing less than 500g(1.1Pound), if use UV light , close to light will help to speed up and rotate heavier
- Use Power from UV lighting /nature Solar Power / Fluorescent Lighting and AA Battery
- The rotation direction can be reversed by stop the rotary table with hand
- Solar panels on 4 sides ensure maximum light reception
- Widely use for family, office , retail stores, multiple shop, exhibitions and for other advertising purposes Packing or home notion.
9. BCZAMD Silicone Slap Mat 410 X 310mm Clean-up or Resin …
- Brand: BCZAMD
- Manufacturer: Aimengda
Features
- Slap Mat is 100% pure, premium silicone and will not be damaged by printer resins, most chemicals or most adhesives! Stop using resin on cardboard and paper towels, and throw away toxic spills after any cleaning or resin transfer.
- Protect your work surface, spill and splatter all you want, and take it outside when you’re done. The resin hardens and is easy and safe to dispose of with a simple snap. Use under any of your printers as an all-arounder.
- Slap Mat is also great as a general craft mat, protecting your work surface from glue, putty or paint from molten solder and the tip of most soldering irons for up to 3 minutes. Therefore, use it under electronics.
- Size: 408x306mm/16.06×12.04 in.
- After-sale warranty: we are responsible seller, any defective item can have the free replacement or refund, further needed, please contact by email or Q & A us, we and our engineers will try our best to help you.
10. 3D Printer Resin Filter Silicone Funnel Strainer Kit for ANYCUBIC …
- Brand: Eewolf
- Manufacturer: Eewolf
Features
- PopuSingTop 3D Printer Stainless Steel Funnel and Silicone Collapsible filter cup for Resin used with SLA DLP and LCD 3D printer
- HzdaDeve Funnel is made of high-quality silicone, soft and pliable, eco-friendly; Collapsible design, compact for easy storage
- Silicone funnel is used to pour resin back into a bottle, fits all kinds of bottles (the width of the funnel neck is around 15mm)
- Filter is made of stainless steel, fine mesh layer effectively filters impurities while pouring resin back into the bottle.
- Both funnel and strainer are easy to clean for reuse.
Benefits of buying the best sla printer under 300 at Amazon
We all know that the products sold on Amazon are cheaper than other places. Amazon has a huge number of items to choose from. This means that it can be hard to decide which product you want, so we have come up with some benefits of buying best sla printer under 300 at amazon.
Supper Fast Delivery
Amazon.com is a company that uses technology to improve customer service. Amazon’s growth strategy involves making the shopping experience easy, convenient, and hassle-free. One of their strategies to improve their customers’ experience is by making sure that orders are delivered as fast as possible. To do this, they have invested in technology for faster delivery and these investments have resulted in Amazon delivering products faster than other e-commerce websites such as Walmart, Best Buy, Target, and even eBay.
The Best Customer Support.
Amazon’s helpdesk is second to none in the eCommerce industry. The company offers excellent customer support and responds to queries within a few hours. Customer service representatives are always available, even on weekends and public holidays. Furthermore, Amazon offers 24/7 live chat through the website, which allows customers to speak with an agent whenever they need assistance.
Final Words
When it comes to shopping online, Amazon is the best place to buy products. Not only does it offer faster delivery and a great customer support, but also offers some of the best prices on certain products. If you’re looking for a product that’s not on our list, or if you have any questions about buying something online, just let us know in the comments below! We are here to help you.