Whether you are new or old in amazon shopping, it is very essential to check before buying. This article will help you find out all the information about the best brake line flaring tool. Moreover, it’s a very smart action to read the pros and cons, benefits, or descriptions thoroughly before purchasing the best brake line flaring tool online to avoid common mistakes. Our expert team has researched some important points to consider before buying the best brake line flaring tool for you.
Review of Best Brake Line Flaring Tool
Top Pick
1. Lisle 33260 Flaring Tool
- Brand: Lisle
- Manufacturer: Lisle
- Color: Factory
- Dimensions: Height: 2.5 Inches Width: 10.5 Inches Length: 4.0 Inches Weight: 1.72 Pounds `
Features
- Creates single or double flares on 3/16″ / 4.75mm and 1/4″ tubing.
- Low Profile Design Allows Tubing to be Flared in Tight Spaces.
- The vise assembly holds tubing centered securely without marring.
- Depth stop ensures proper tubing length.
Best Quality
2. Titan 51535 3/16-Inch Double Flaring Tool
- Brand: Titan
- Manufacturer: Titan
- Color: Factory
- Dimensions: Height: 9.1 Inches Width: 5.1 Inches Length: 2.0 Inches
Features
- Set Contents: (1) 3/16-Inch Double Flaring Tool with Removable Handle, (1) Positioning Bolt, (1) Double Ended OP1/OP2 Punch, (1) Container of Die Lubricant
- Creates a perfect inverted 45-Degree SAE double flare with 3/16-inch steel and nickel-copper tubing. Not recommended for use on stainless steel tubing.
- Can be used on the vehicle! Compact design can be used in tight under-car spaces allowing user to repair brake lines in place on the vehicle.
- Handle can be removed if you prefer to use in a bench vise.
- SAE Double Flare is an inverted 45-Degree flare typically used in automotive brake line applications. 3/16-Inch brake lines are on almost all cars and trucks making this flaring tool usable with most vehicles.
Recommended
3. Thorstone Double & Single Flaring Tool Kit for Brake Line …
- Brand: Thorstone
- Manufacturer: Thorstone
Features
- đVARIOUSÂ APPLICATIONS – Thorstone double flaring tool set is designed to create 45-degree double or single flares in copper, aluminum, magnesium, soft steel brake lines and brass tubing (Not applicable with hard material like steel, iron……).
- đPACKAGE CONTENTS – 1 flaring cone, 1 flaring bar (flaring yoke), 1 tube cutter, 5 adapters and 1 blow-molded case for easy transportation and storage, meets all your needs.
- đPREMIUM MATERIAL – The flaring bar and forged yoke is constructed from premium heat treated steel for strength and durability. The chrome swivel is made of alloy steel to reduce friction.
- đALL IN ONE SET – 5 sizes of adapters (3/16″, 1/4″, 5/16″, 3/8″ and 1/2â) and a cutter for 1/8″-5/8″ pipe make the flaring tool versatile. It can be used on brake line, air conditioning brass line, HAVC and so on.
- đ100% SALE SUPPORT -We back up all products for life, 24*7 fast response customer service free all your concerns. Sincerely thanks for your support to Thorstone!
4. ARES 18012 – Professional Brake Line Flaring Tool – Use …
- Brand: ARES
- Manufacturer: ARES
- Dimensions: Height: 4.0 Inches Width: 11.0 Inches Length: 14.0 Inches
Features
- INCLUDES: This Professional Brake Line Flaring Tool includes dies in the following sizes: 3/16-inch, 1/4-inch, 5/16-inch, and 3/8-inch. This tool set also includes a convenient storage case to ensure that you’ll never misplace part of your kit.
- DESIGN CONSIDERATIONS: This tool is designed to be mounted in a vise, and the T-handle screw clamp securely keeps the die and tubing in place, so you can create flares quickly and easily.
- APPLICATIONS: This versatile Professional Brake Line Flaring Tool can be used to create a 45-degree double, bubble, or single flare in steel, stainless steel, copper, and aluminum tubing. Whether you’re working on brake lines, transmission cooler lines, or fuel lines, this tool will help you create the flares you need quickly and easily.
- RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed by our Performance Assurance. If you have any issues with your ARES professional brake line flaring tool, simply contact customer service for troubleshooting help, parts, replacement, or refund.
- ASPCA BUSINESS AMBASSADOR: We are proud to be part of the ASPCA Business Ambassador Program. If you have a pet, you realize they are more than a pet, they are part of the family. With your support, weââŹre proud to help this great organization.
5. Capri Tools 3/16 in. Double Flaring Tool (CP21110-316)
- Brand: Capri Tools
- Manufacturer: Capri Tools
- Dimensions: Height: 1.55 Inches Width: 5.0 Inches Length: 8.9 Inches Weight: 0.8 Pounds `
Features
- Get the job done in half the time: this compact and portable Double Flaring Tool lets you easily create high quality 45-degree SAE double flares on 3/16 in. tubing such as brake lines
- Works flawlessly with 3/16 in. steel, nickel, and copper tubing
- Compact design lets you create perfect double flares both off vehicle and on vehicle, even in tight spots
- Detachable die lets you also use with a bench vise
- All-in-one tool. All you need is a 10 mm and a 17 mm wrench to work with the tool
6. ABN Professional Brake Line Flaring Tool Kit, 45 Degrees – …
- Brand: ABN
- Manufacturer: ABN
- Dimensions: Height: 6.3 Inches Width: 3.5 Inches Length: 14.25 Inches Weight: 8.3 Pounds `
Features
- [Get a Leakproof Connection]: When building car brake lines, the ABN Professional Brake Flaring Tool Kit adds a flare (makes tubing wider) to brake line end for a leak-free connection without hours of hand cramping or twisting exercises
- [Fits Your Application]: 45-degree set creates single, bubble, and double flares on steel, stainless steel, and soft metal (copper, aluminum) brake lines, transmission cooler lines, and fuel lines; For 3/16-inch (4.75mm), 1/4-inch (6.35mm), 5/16-inch (8mm), and 3/8-inch tubing
- [Use Your Vise]: Use on a bench-mounted vise in your workshop or on a hitch-mounted vise in the field (not intended for use under car); 6-inch (15.2 cm) T-handle screw clamp holds die and tube in place so you can create flares quickly and easily
- [Durability You Need]: Deburred square pipe end with outer edge chamfered approximately 0.25 x 45 degrees; Each die block is 1.7 inches (4.3 cm) long; Approximate 1.5-inch (3.8 cm) actual clamping surface [we recommend only placing bends in the last 2.5 inches (6.4 cm) of tube after flared]
- [Package Contents]: Brake line flare kit includes (1) brake line flare tool with T-handle and 11-inch lever with 5-inch texturized rubber sleeve (27.9×12.7 cm), (4) end dies, (1) instruction manual, and (1) 14.1 x 6.1 x 3.5 inch (35.8×15.5×8.9 cm) plastic blow-molded carrying case
7. TGR Professional Brake Line Flaring Tool- 45 Degree Set – …
- Brand: TGR
- Manufacturer: TGR
Features
- Includes dies for 3/16â, 1/4â, 5/16â, 3/8â tubing.
- Creates Single Flares, Bubble Flares, and Double Flares
- Easy operation. Mounts in a vise
- T-handle screw clamp securely holds die and tube
- Each tool comes pre-tested from the factory and includes the sample flare from the test.
8. KOOPOOL Double & Single Flaring Tool Kit for Brake Line …
- Brand: KOOPOOL
- Manufacturer: KOOPOOL
- Dimensions: Height: 1.574803148 Inches Width: 5.511811018 Inches Length: 12.992125971 Inches Weight: 2.755625 Pounds `
Features
- ăMultifunctionăThis flaring tool creates 45-degree double or single flares. It can be applied to copper, aluminum, brass, magnesium, and other soft steel lines. Ideal for brake line, HAVC, air conditioning brass line and so on
- ăDurable MaterialăYoke made of heat-treated steel material for maximum strength and longevity. Swivel made of chrome-plated alloy steel to reduce friction
- ăApplicationsăDouble flaring tool kit suitable for: 3/16â, 1/4â, 5/16â, 3/8″, 7/16″, 1/2″, 5/8″ (5, 6, 8, 10, 12, 14, 16mm) single or double flares; Tubing cutter has a 1/8â to 1-1/8â inches (3-30 mm) capacity with inner / outer reamer
- ăTubing Cutter IncludedăPipe cutter has 2 rollers and fold-away slide lock reamer deburring blade; used to cut steel, aluminum, and copper tubing; cutting wheel life and adjustment amount for each turn depends on material hardness
- ăEasy Storage and PortableăHeavy-duty plastic blow-molded carrying case with latches and handle for easy transportation, safe storage and quick organization
9. Shankly Flaring Tool Set (10 Piece – Professional Grade) Heavy …
- Brand: Shankly
- Manufacturer: Shankly
- Dimensions: Height: 8.0 Inches Width: 2.0 Inches Length: 15.0 Inches Weight: 5.3572329666 Pounds `
Features
- â ALL-INCLUSIVE KIT: Shanklyâs standard flaring tool kit is all-inclusive, complete with a professional tubing straightener or cutter, allowing the mechanic to focus on the job rather than search for parts. Please note: this is NOT a double flare tool
- â MULTIFUNCTIONAL FLARE ADAPTERS: Flaring tool adapters range from the following sizes: 1/8″, 3/16″, 1/4″, 5/16″, 3/8″, 7/16″, 1/2″, 5/8″, making this the only brake line kit a mechanic will need. (Metric: 5mm, 6mm, 8mm, 10mm, 12mm, 14mm, 16mm)
- â FITS YOUR APPLICATION: Shankly’s flaring tool or brake line tool includes five swage fittings and several useful tube sizes: 3/16â, 1/4â, 5/16â, 3/8â, 1/2â, 5/8â, creating a rugged and long lasting brake repair brake flaring tools
- â PRECISE AND CONVERTIBLE: This brake line flaring tool swivel-type swaging adapters and flaring cones are made of the sturdiest steel materials and chromed finished for easy operation with a self-centering yoke to help form professional flares and swages
- â SATISFACTION GUARANTEED: We stand by the word “quality” we assure you that your purchase of this heavy-duty brake line flaring tool or brake tool will arrive in your place in good condition, If any issues occur, feel free to contact us
10. K Tool International Brake Line Flaring Tool, 45 Degree Set. …
- Brand: K Tool International
- Manufacturer: KTI
- Color: Black
- Dimensions: Height: 4.0 Inches Width: 11.0 Inches Length: 14.0 Inches Weight: 8.0 Pounds `
Features
- [VERSATILE] – Easily form 45-degreee double, single, and bubble flares in OE steel, stainless steel, and soft metal tubing
- [DIAMETER] – Use with 3/16″, 1/4″, 5/16″, 3/8″ diameter lines, which means it will handle your toughest jobs, from brake lines to transmission cooler lines.
- [VISE-MOUNTED] – Mount in your vise to help you easily form 45 degree flares in OE steel, stainless steel, and soft metal tubing.
- [T-HANDLE SCREW CLAMP] – T-handle screw clamp securely holds line in place during forming.
- [EASY TO USE] – With the turret-style design K Tool allows you to make those precision flares in minimal time.
Benefits of buying the best brake line flaring tool at Amazon
You might be thinking of buying the best brake line flaring tool online, and you want to buy it from Amazon.com. But what is the best part about buying products on Amazon? Hereâs a list of the benefits you get while shopping on Amazon.
Supper Fast Delivery
Amazon.com is a company that uses technology to improve customer service. Amazonâs growth strategy involves making the shopping experience easy, convenient, and hassle-free. One of their strategies to improve their customersâ experience is by making sure that orders are delivered as fast as possible. To do this, they have invested in technology for faster delivery and these investments have resulted in Amazon delivering products faster than other e-commerce websites such as Walmart, Best Buy, Target, and even eBay.
The Best Customer Support.
Amazon’s helpdesk is second to none in the eCommerce industry. The company offers excellent customer support and responds to queries within a few hours. Customer service representatives are always available, even on weekends and public holidays. Furthermore, Amazon offers 24/7 live chat through the website, which allows customers to speak with an agent whenever they need assistance.
Final Words
When it comes to shopping online, Amazon is the best place to buy products. Not only does it offer faster delivery and a great customer support, but also offers some of the best prices on certain products. If you’re looking for a product that’s not on our list, or if you have any questions about buying something online, just let us know in the comments below! We are here to help you.